Skip to content
Reading progress0%
Chapter 10 · Deeper interpretation

Oxygenation & hypoxaemia

Pressure, saturation and delivery are not the same thing.

24 min read5 questions · 2 synthetic casesIndependent clinical review pending

By the end of this chapter

  • Calculate P/F using arterial data and a fraction
  • State alveolar-equation assumptions
  • Distinguish hypoxemia from tissue hypoxia

Visual physiology

Alveolus → blood: gas exchange in opposite directions

  1. Inspired gas → alveolus

    FiO₂ and barometric pressure set oxygen availability

  2. O₂: alveolus → capillary blood

    Pulmonary venous blood returns toward the left heart

  3. CO₂: capillary blood → alveolus

    Pulmonary arterial blood arrives from the right heart

  4. A–a: estimated minus measured

    PAO₂ 99.73 − PaO₂ 60 = 39.73 mmHg

AlveolusInspired oxygenCapillary bloodO₂CO₂
The alveolar–capillary schematic shows diffusion directions, not vascular flow rates. Example: room air, sea level, PaCO₂ 40 and RQ 0.8. V/Q mismatch, shunt and diffusion limitation require further evidence; arterial inputs are mandatory.Original educational schematic · Independent clinical and visual review pending.

What arterial oxygen pressure tells you

Hypoxemia is reduced arterial oxygenation, commonly assessed with PaO₂ in context. Hypoxia concerns inadequate oxygen availability at tissue level and can occur despite a normal PaO₂, for example when oxygen content or delivery is impaired. Most oxygen is carried by hemoglobin, so pressure alone cannot establish adequate content.

The oxyhemoglobin dissociation curve relates pressure and saturation nonlinearly and shifts with physiological conditions. SaO₂ is arterial saturation, whereas SpO₂ is a pulse-oximeter estimate. Anemia and dyshemoglobins illustrate why a reassuring pressure or displayed saturation does not settle the delivery question.

P/F ratio: simple arithmetic, demanding inputs

P/F = PaO₂ in mmHg / FiO₂ as a fraction

A PaO₂ of 80 on FiO₂ 0.40 gives P/F 200 mmHg. FiO₂ must be known at the time of sampling; estimated delivery from low-flow devices can be uncertain. P/F varies with oxygen delivery and respiratory support. It is not a stand-alone diagnosis of ARDS or a treatment prescription.

Use arterial values only. Venous and capillary pO₂ are not accepted substitutes here. If source or FiO₂ is unknown, explain that the index cannot be calculated reliably instead of assuming room air. State both the oxygen input and its uncertainty alongside the result.

The alveolar estimate and A–a gradient

PAO₂ ≈ FiO₂ × (Patm − 47) − PaCO₂/RQ; A–a = PAO₂ − PaO₂

For a simplified sea-level estimate use barometric pressure 760 mmHg, water vapor pressure 47 mmHg at body temperature and respiratory quotient 0.8. These are assumptions, not measured patient constants. Altitude, temperature, RQ and high inspired oxygen can affect the estimate. PAO₂ is calculated alveolar pressure; PaO₂ is measured arterial pressure.

A raised A–a gradient can support a gas-exchange problem such as V/Q mismatch, diffusion limitation or shunt, while hypoventilation or reduced inspired oxygen may cause hypoxemia with a less increased gradient. Age and inspired oxygen affect expected values. Do not assign a cause from the gradient alone or use a sea-level baseline at altitude. These outputs use the simplified alveolar gas equation; particularly at high FiO₂, label the A–a gradient approximate rather than treating it as an exact measurement.

Worked example

Room-air arterial oxygenation

  1. 1.Synthetic arterial PaO₂ 80, PaCO₂ 40 mmHg; FiO₂ 0.21, sea level, RQ 0.8.
  2. 2.PAO₂ ≈ 0.21 × (760 − 47) − 40/0.8 = 149.73 − 50 = 99.73 mmHg.
  3. 3.A–a ≈ 99.73 − 80 = 19.73 mmHg; interpretation requires age and context.
  4. 4.P/F = 80/0.21 ≈ 381 mmHg. Neither index alone establishes a disease diagnosis.

Common mistakes & exam tips

  • Never label capillary or venous pO₂ PaO₂.
  • Do not infer FiO₂ when it is missing.
  • Do not diagnose ARDS from P/F alone or infer oxygen delivery from PaO₂ alone.

Check your understanding

Five questions to consolidate the chapter

01PaO₂ 80 and FiO₂ 0.40 gives P/F…

02PAO₂ denotes…

03The simplified room-air sea-level estimate commonly assumes RQ…

04Can capillary pO₂ safely replace PaO₂ for these exercises?

05Normal PaO₂ guarantees adequate tissue oxygen delivery?

Reason through two clinical cases

SYNTHETIC CASEIntermediate

Oxygenation on supplemental oxygen

Synthetic verified arterial sample on a known stable FiO₂.

PaO₂ 80 mmHg · PaCO₂ 40 mmHg · FiO₂ 0.40

SYNTHETIC CASEAdvanced

Estimate the A–a gradient

Synthetic arterial room-air gas at sea level; RQ 0.8 is assumed.

PaO₂ 60 mmHg · PaCO₂ 40 mmHg · FiO₂ 0.21

The essentials to take away

  • Arterial source and contemporaneous FiO₂ are prerequisites.
  • PAO₂ and the A–a gradient depend on explicit assumptions.
  • Hypoxemia, saturation and tissue oxygen delivery are distinct.

References & further reading

Related case practice